User's Manual

Wireless Mini-PCI Card Version: 0.9
Page 14 of 26
 Disable Radio: click on this button to turn the radio off.
 Rescan: click on this button if you would like the radio to scan for a
different channel.
 Current Channel: this displays the current channel that the radio is using.
 Throughput (bytes/sec): this displays the transmitting (Tx) and receiving
(Rx) bytes per second.
 Link Quality: this displays the quality of the link from the radio to the AP.
 Signal Strength: this displays the strength of the signal from the radio to
the AP.
 Click on the Apply or OK button if you have made any changes.
3.3.2 Configuration
The Configuration tab allows you to configure the SSID and type of network.
The following information is included in this tab, as the image depicts below.
 Profile Name: enter a name for this profile; this can be any name that you
may associate with your network.
 Network Name: enter the SSID of the network. The SSID is a unique
name shared among all points in your wireless network. The SSID must be
identical for all points in the network, and is case-sensitive.
 Network Type: select Peer-to-Peer or Access Point from the drop-down
list.
 Click on the Apply or OK button if you have made any changes.