User Manual

9
2.2 Checking after Installation
After installing the driver and utility, follow the steps below to check that
the PC Card is operating correctly.
1. Click the Start button, select Settings, and then click Control Panel.
2. In the Control Panel window, double-click the System icon, then
select the Device Manager tab.
3. Double-click Network adapters, then select Wireless LAN PC CARD
as shown in Figure 2-3
Figure 2-3
4. Click the Properties button, then check the message. This device is
working properly is displayed for Device status as shown in Figure 2-
10
4.
5. If you find the Yellow (?) sign on the adapter or the above message is
not displayed, it shows the installation is not successful or the wireless
LAN PC Card is not operating properly. Uninstall and re-install the
driver, referring to Chapter 2-6 Uninstalling Driver and Utility.
Figure 2-4