User Manual

Version 1.7.37R2
17
Figure 3-1
Version 1.7.37R2
18
3.2 Checking and Adding NetBEUI
NetBEUI is a protocol you can use to connect to Windows NT, Windows for
Workgroups, or LAN Manager servers. If you work on Microsoft network
environment, you need to set up NetBEUI protocol.
1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for
Microsoft Networks.
2. Select Configuration tab to check NetBEUI -> Wireless LAN PC Card is
installed. If no, click the Add button. Select Protocol and click the Add button.
3. Select Microsoft for Manufacturer and NetBEUI for Network Protocol, and then
click OK.
3.3 Checking and Adding TCP/IP
TCP/IP is the protocol you use to connect to the Internet and wide-area
networks. If you want to connect to Internet, you need to set up TCP/IP
protocol.
1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for
Microsoft Networks.
2. Select Configuration tab to check TCP/IP -> Wireless LAN PC Card
is installed. If no, click the Add button. Select Protocol and click the
Add button.
3. Select Microsoft for Manufacturer and TCP/IP for Network Protocol,
and then click OK.
4. If yes, double-click TCP/IP -> Wireless LAN PC Card to open TCP/IP
properties as shown in Figure 3-2. Due to different network
applications there are many different settings here. You can select
either Obtain an IP address automatically or Specify an IP address.
If you use the Specify and IP address, then you need to enter an IP
address, Subnet Mask, Gateway IP address, and DNS Server IP
address for connecting to Internet.