User's Guide Part 2

47 Sendo Z100 User Guide
4
Messaging Features
Sending
Use the Sending options to set up defaults for
sending messages. Select one of the following
checkboxes:
Receiving
Use the Receiving options to limit the size of new
messages that are automatically downloaded.
X To set the size limit of messages which are
downloaded automatically
1. On the Options screen select Receiving and
press Action A.
2. Use the [ and ] keys to scroll through the
options: Header only, Entire message, first
500 bytes, first 1000 bytes or first 5000 bytes.
3. Press Done d.
Pre-defined text
Use this option to edit the predefined text that you
can insert in messages.
X To amend pre-defined text
1. On the Options screen select Pre-defined text
and press Action A.
2. Use the : and; keys to select the text you want
to change. You can edit the existing text or
change it completely.
3. Press Done d.
E-mail set up
The easiest way to set your Z100 up to send and
receive e-mail is to visit www.sendo.com/support/
config to autoconfigure your e-mail settings. The
configurator sends an SMS to your phone (or sends
the information to your phone directly if it connected
to your PC using ActiveSync) containing all the
settings you require to start using e-mail.
z Note: You can also use the Smartphone
Configuration Wizard on the Z100 Companion
CD to set up e-mail, but you will need to know
the required settings.
Alternatively, use this option to configure your phone
to send and receive e-mail messages. Your service
provider or network administrator will need to
provide you with the necessary information to
connect to your e-mail server.
Select this To
Include copy of
original
message when
replying to an
e-mail
Always include the e-mail you are replying to in
your outgoing e-mail message.
Save copies of
sent items
Always save copies of outgoing e-mails. This
does not apply to SMS messages which are
always stored.
Use Unicode
for SMS when
necessary
If you insert a Unicode character into a
message, the whole message is changed to
Unicode. Remember that using Unicode
characters limits the size of your message.
Server requires
Authentication
This is only relevant if you are using an SMTP
server to send e-mails. If you select this
checkbox, every time you send an e-mail your
user details are verified by the SMTP server
before the e-mail is delivered.
z100.book Page 47 Wednesday, September 18, 2002 4:03 PM