User's Manual

SENDUM WIRELESS, CORP.
3.2 Installing the Battery
The battery is inaccessible by users
3.3 Removing the Battery
The battery is inaccessible by users
3.4 Charging the Battery
New batteries are shipped partially charged. Before you can use your device, install and
charge the battery as described below. Some batteries perform best after several full
charge/discharge cycles.
3.4.1 Charging using the DS500 Device
Simply attached the Sendum charger into the device and plug the AC adapter to the AC
outlet.
4 Provisioning Your Device
Ø Connect your device using the sendum USB cable. If problem communicating
with the device. Use the following documents for troubleshooting:
DEX00003 (DOC
QUALCOMM USB DRIVER INSTALLATION).doc
Ø Open the Sendum Provisioning Tool. Should look like: