User's Manual

SENDUM WIRELESS, CORP.
//BREW:0x12345678:PSW2,COMMAND,STATUS
Causes the device to send a status report.
//BREW:0x12345678:PSW2,COMMAND,LOCATE
Causes the device to locate itself and send a location report.
//BREW:0x12345678:PSW2,REPORT,STATUS,<interval>
Causes the device to send a status report every <interval> seconds.
//BREW:0x12345678:PSW2,REPORT,LOCATION,<interval>
Causes the device to send a location report every <interval> seconds.
The device sends the following messages to the APP IP address:
@RESPONSE,<MDN>,PSW2,RESPONSE,STATUS,BATTERY=<0..255>,
TEMPERATURE=<0..255>
Indicates device status.
@RESPONSE,<MDN>,PSW2,RESPONSE,LOCATE,FOUND
Indicates that the device found itself. This is in response to a command to locate the
device. Actual location results are returned from the PDE and vary from carrier to carrier.
6 Locating Your DS500
In order to Locate your VT100, send it the following SMS message:
PSW1,LOCATE,0
6.1 Frequent Tracking
In order to Track (repeated locating) your VT100, send it an SMS message in the
following format:
PSW1,LOCATE,X
where the value of X is specified according to the following table:
1
wait 15 seconds before locating again
2
wait 30 seconds before locating again
3
wait 45 seconds before locating again
4
wait 60 seconds before locating again