User's Manual

SENDUM WIRELESS, CORP.
9 Exposure to Radio Frequency (RF) Signals
Your Dual Band Wireless Tracking Device is a radio transmitter. It is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission (FCC) for the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general population.
The guidelines are based on the safety standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless Devices employs a unit of measurement known as Specific
Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg1. SAR tests are conducted
using standard operating positions specified by the FCC with the Device transmitting at its
highest certified power level in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the Device while operating can be well
below the maximum value. This is because the Device is designed to operate at multiple power
levels so as to use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output of the Device.
Before a new model Device is available for sale to the public, it must be tested and certified by
the FCC to insure that it does not exceed the limit established by the government adopted
requirement for safe exposure. The tests are performed in positions and locations (e.g., at the
ankle and worn on body) as required by the FCC for each model. While there may be differences
between SAR levels of various Devices and at various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for this model Device with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this
model Device is on file with the FCC and can be found on the FCC website
(http://www.fcc.gov/oet/fccid) after searching the FCC ID printed in the label on the Device.
The highest SAR value for this model Device when tested for use at the ankle is 0.403 W/kg, and
when worn on the body, as described in this user guide, is 1.175 W/kg.
1 In the U.S. and Canada, the SAR limit for mobile Devices used by the public is 1.6 Watts/kg (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in measurements.
10 Important Safety and Legal Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ
THIS INFORMATION BEFORE USING YOUR DEVICE.
Ø Never attempt to disassemble your OM200. If service or repair is required, return
the device to an authorized Sendum service centre.
Ø Always use Sendum provided accessories. Use of incompatible equipment could
result in fire, electric shock, or bodily injury.
Ø Never allow children to play with your OM200.