User Manual

CONFIRMATION
SELFTEST
After installation, the tracking unit initiates a series of self-tests to
make sure the system is functioning properly. These tests only last
approximately 3 seconds.
STATUS MONITORING
After successful completion of the self-test, the tracking unit initiates
location acquisition and checks for cellular service availability. During
this period, the tracking unit also monitors battery and tamper status.
If using a beacon, the tracking unit will search for the beacon’s signal,
which is transmitted every 10-13 seconds.
HOST COMMUNICATION
While continuing to monitor equipment status, the tracking unit calls
the central monitoring computer to download configuration data.
During this communication with the central monitoring computer,
the tracking unit reports a successful installation. The following
messages will appear in the system software when the tracking unit is
successfully installed:
 • TrackerRestart
 • TrackerBatteryRestore
 • TrackerTamperRestore
12•BIExacuTrackOneQuickInstallationGuide•8-90-00130-0,RevisionA
ASSEMBLING: STEPS 110
To Assemble the Tracking Unit >
Step 1
Insert the battery into
the battery well with the
gold connection rings
facing toward the top of
the unit case.
Step 2
Position one of the
battery hatch alignment
arrows toward the
unlocked position. Using
a screwdriver, apply force
while turning the battery
hatch clockwise until it
reaches the locked position.
Step 3
Slide the fixed strap into
the fiber-optic connection
bay opposite of the
charging port.
•8-90-00130-0,RevisionA•5
Gold
Connection
Rings