User Manual
6•BIExacuTrackOneQuickInstallationGuide•8-90-00130-0,RevisionA
Step 4
Slide the adjustable strap
into the other fiber-optic
connection bay.
Step 5
Using a Phillips screwdriver,
secure the straps to the
unit case with the provided
screws. Place one screw in
each strap hole, and turn
each screw clockwise until
you feel resistance.
Step 6
Slide the end of the
charging port cover into the
slot on the bottom of the
unit case.
Step 7
Insert the charging port
cover into the charging port
on the front of the unit case.
To Assemble the Tracking Unit (cont.) >
Step 3
Close the hinge assembly
around the straps until the
locking holes are aligned.
Step 4
Slide the joint pin through
the locking holes until it is
flush with both hinges.
•8-90-00130-0,RevisionA•11