Datasheet

107
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Temperature Converters
Pt1000
19,2..30Vdc
4...20 мА
+25 C°
K109PT-HPC is an high performance converter for Thermoresistance
PT100 with 2,3,4 wires and provides a mA/V standard output
signal. The max admitted error is lower than K109PT because
reported to a smaller range.
It’s completely configurable through dip switches. A 3-way galvanic
isolation among Power supply // input // output circuits assures
the integrity of your datas.
K109PT-HPC
19,2...30
Vdc
Power
Supply
Input
Pt1000
Output
V
TECHNICAL SPECIFICATIONS
General Data
Power supply
19,2..30 Vdc
Power consumption
500 mW
Isolation
1.500 Vac (3 way)
Power transducers
-
Accuracy
0,1%
Response time
< 50 ms (without filter)
< 200 ms (with repeat filter 50 Hz)
Status Indicators
Settings error, connection malfunction, internal malfunction.
Settings
Dip- switches
Mounting
35 mm DIN rail guide
Protection Degree
IP20
Operating
Temperature
-20..+65 °C
Dimension (W x H x D)
6,2 x 93,1 x 102,5 mm
Input
Channel Numbers
1
RTD
Pt100,
Measure 2, 3, 4 wires
Range: -200..160 °C
Resolution 14 bit
Output
Channel Numbers
1
Voltage
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.000 Ω
Current
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
Standard
Approval
CE
Norms
EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN
50140/141; EN 61010-1
SIMILAR PRODUCTS
Z109PT2 T120 K120RTD
RTD to DC current/voltage
isolator/ converter
Pt100, Ni100 loop powered
transmitter
Pt100, Ni100 loop powered
converter
pg. 91 pg. 116 pg. 109
PT100 (HIgH-PRECISIon) To DC CURREnT/VoLTAgE ISoLAToR ConVERTER
Code Description
K109PT-HPC
Pt100 (high-precision) to DC current/voltage isolator converter, power supply
19,2..30 Vdc
ORDER CODES
APPLICATION NOTE
ACCESSORIES & SOFTWARE
K-BUS K-SUPPLy
Backplane for power connection Redundant power supply module
pg. 114 pg. 114