Datasheet

ManualsBrandsSeneca ManualsData & CommunicationsModbus System

I/O SYSTEMS> MODBUS DISTRIBUTED I/O SYSTEM > Modbus Digital Modules

Z-10-D-IN is a 10 digital inputs with self-powered 16V DC shared

negative pole. Z-10-D-IN has 8 built-in inputs with 16 bit contactor

with 100 Hz max. frequency and 2 inputs with 32 bit contactor with

10 kHz max. frequency. At 10 kHz Z-10-D-IN assures frequency

measurement. For 100 Hz input the module measures period,

frequency and TON, TOFF. The module offers possibility to set total

counters for forward or backward counting. Z-10-D-IN gives also

overﬂow indication for each total counter.

Z-10-D-IN

10..40 Vdc

10..28 Vac

Power

Supply

Input

100 Hz

10 kHz

10-CH DIGITAL INPUT MODULE / RS485 MODBUS RTU

TECHNICAL SPECIFICATIONS

Electrical Speciﬁcations

Power supply

10..40 Vdc / 19..28 Vac / 50-60 Hz

Power consumption

1,5 W

Isolation

1.500 Vac (3 way)

Status Indicators

Power supply, Fail, RX, TX

Protection Degree

IP20

Input protection

600 W/ms transient current suppressors

Thermomechanical Speciﬁcations

Operating

Temperature

-10..+65 °C

Dimension (W x H x D)

17.5 x 100 x 112 mm

Weight

About 140 g

Enclosure

PBT, black

Connections

Removable 3-way crew terminals, 3.5 pitch

Rear IDC10 connector for Z-PC backplane

Mounting

35 mm DIN rail guide

Communication

Interface

2 wire RS485

Speed

Up to 57.600 bps

Protocol

ModBUS RTU slave

Distance

Up to 1.200 m

Connectivity

Max 32 nodes

Signals

Channel Numbers

10, self powered 16 Vdc shared negative pole

Type

Reed, contact sensors, proximity, pnp, npn

Nr 2 inputs - 32 bit counters @ 10 kHz

Nr 8 inputs - 16 bit counters @ 100 Hz

Absorbed current: 3 mA (per input)

Min pulse width: 4 ms..50 μs

Conﬁguration

DIP switches

Baud rate, address, inversion scale, digital ﬁlter, totalizers, Modbus

latency time

Software

Z-NET3 (Iec 61131)

EASY Z-10-D-IN (plug&play)

Standard

Approval

CE, RINA, UL UR CSA

Norms

EN 61000-6-4; EN 61000-6-2; EN 61010