Sengled Smart LED Multicolor Lightstrip Model: E1G-G8E
Introduction Sengled Smart Lightstrip enables you to wrap your house in color, whether it’ s under the cabinets, around your tv, or anywhere else you would like to have some color without a traditional socket. Additionally, the lightstrip can be extended or shortened to fit your desired length. Note: A hub is required to control this Lightstrip.
Important Safety Information Before installing the Sengled Smart Lightstrip, please read and follow precautions, including: • For safety reasons, do not attempt to disassemble the controller pack. • Suitable for use in operating environment between -20℃ and 40℃(-4°F and 104°F). • Indoor use only. Do not use where directly exposed to water. Installation Instructions The following instructions are applicable for adding your Smart Lightstrip to a Sengled hub.
extensions. 2. Where can I cut the lightstrip? This lightstrip is designed for indoor use only. The lightstrip could be cut every 25cm to the perfect size. 3. Can different types of Sengled Smart devices be used simultaneously? Sengled Smart hubs can support up to 64 Smart LED devices. CAUTION • INDOOR USE ONLY • DO NOT USE WHERE DIRECTLY EXPOSED TO WATER.
© 2019 Sengled, Incorporated. All rights reserved. Sengled is a trademark of Sengled, Incorporated, registered in the United States and other countries. Specifications are subject to change without notice. Other trademarks and trade names are the property of their respective owners.
