User's Manual

Important Safety Information
Before installing the Sengled Smart Lightstrip, please read and follow
precautions, including:
• For safety reasons, do not attempt to disassemble the controller pack.
• Suitable for use in operating environment between -20
℃
and 40
℃
(-4°F
and 104°F).
• Indoor use only. Do not use where directly exposed to water.
Installation Instructions
The following instructions are applicable for adding your Smart Lightstrip to a
Sengled hub. If you have a third-party hub, such as SmartThings or Amazon
Echo Plus, or would like to find our latest list of supported third-party hubs,
please refer to support.sengled.com.
Note: Sengled recommends ensuring you can add your lightstrip before
attaching it to the wall, bed, etc.
1. Download the latest version of the Sengled Home App from the Apple App
Store or Google Play Store.
2. Register and sign in to your Sengled account using Sengled Home App.
3. Open the Sengled Home App, go to Devices, select the + sign, and choose
Bulbs. Follow the instructions to finish installation.
4. Once you have successfully connected the Lightstrip to your hub, you may
attach it to wherever you would like in your home.
Since the Lightstrip is made of a flexible material, you can attach it to
virtually anything, including things that have corners sharper than 90 degrees.
Congratulations on successfully installing your Smart Lightstrip!
Reset Instructions:
To reset your Smart Lightstrip, locate the reset button and hold for 3 to 10
seconds. When the Lightstrip is successfully reset, it will flash five times. If it
does not flash, please try again. Once successfully reset, please pair the
Lightstrip again in your Sengled Home app.
Frequently Asked Questions
1. How long can I extend the lightstrip?
The lightstrip could be extended to at least 10 meters by adding the 1m