smart lighting expert Sengled Smart Wi-Fi TV Light Strip with Video Sync USER GUIDE
Introduction: The Sengled Smart Wi-Fi TV Light Strip with Video Sync offers an easy solution to elevate the movie-watching and gaming experience. Video Sync locally analyzes whatever is playing on your TV and extends the action beyond the screen. The segmented strip allows for different addressable LED zones to change colors independently for maximum visual effect. Wi-Fi connectivity integrates with Amazon Alexa and Google Assistant voice platforms, or control with the Sengled Home app.
Installing the TV light strip 1. Ensure the TV back surface to be clean and dry. 2. There are two models of Video Sync TV light Strips, suiteble for the TV size below: TV size Strip length 70”-85” 15.7ft 50”<65” 11.8ft 3. Ensure the strip paste position. 1) Measure the mounting surface on the back your TV and refer to the below strip recommended length by TV size. 2) Use the clips to reinforce the strip at each corner of the TV.
Installation direction Clockwise Counterclockwise Start Location Start Location 6. At corners, please bend the strip as shown below. Bending Options LED at bend! Max. 90° × √ 7. If the strip is too long for your TV, you can shorten the strip by cutting along the pre-maked lines with scissiors.
8. Stick the double-sided tape on the bottom of the camera. 3M 3M 9. Affix the camera to the TV frame. The camera can be placed on the top or below the TV screen. 10. Plug the power adapter and strip into the ports of the camera.Manage the cablse using one of the provided clips. Plug in the power adapter.Installation is finished.
Sengled Home App setup The following instructions are applicable to adding your Smart Wi-Fi TV Light Strip through the Sengled Home app. If you would like to use third party smart home services, such as Amazon Alexa, Google Assistant, or would like to find our latest list of supported third-party integrations, please refer to support.sengled.com Ensure your mobile device is connected to the same Wi-Fi router that you would like to setup the smart Wi-Fi TV Light Strip using a 2.4 GHz connection. 1.
④Submit all operations and finished the Sengled Home App setup. 4. If the app unsuccessfully discovers the TV Light Strip, please refer to the next section "Reset Instructions" for how to reset your TV Light Strip before attempting to re-add it. Reset Instructions: Reset button To reset your Smart TV Wi-Fi LED Light Strip, locate the reset button, push and hold for at least 5 seconds. When the Light Strip is successfully reset, it will flash three times. If it does not flash, please try again.
operations. D.Voice Control • Set up Amazon Alexa by adding Sengled Home Skill. • Set up Google Assistant by adding Sengled Home Service. E.Tuning Whites Adjust whites via the white palette in the Sengled Home app, or with voice control. F.Changing Colors Change between 16 million colors using the color palette in the Sengled Home app, or with voice control. Frequently Asked Questions: 1. Why is the light strip not turning on? a.
If you need help with changing your firewall settings: For routers provided by your internet service provider, please contact your internet service provider. For a router you own, please contact the manufacturer of the router. Limited Warranty: 2-year limited warranty from original purchase date. Sengled restrict warranty service for smart home device to the country where Sengled or its authorized retailor originally sold the device.
9 150 / v1.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ISED Notice: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cetappareilestconforme à la norme RSS d'Industrie Canada.
