Instruction manual

SENKO cookers 2P extra rustik and glass – Instruction manual 10
1.4. INSULATION
The cooker is insulated in the boiler area towards the external surfaces with
fire resistant rock wool, 20 mm thick. Other internal cooker parts are
insulated with chamotte brick, 25 mm thick. Chamotte brick, 60x60 mm is
used around the upper frame.
2. WARNINGS AND SAFETY
When connecting the cooker to the chimney and the central heating
system, adhere to national and European norms and local regulations.
Prior to use, verify with the local authorized chimney-sweeper whether the
cooker is properly connected to the chimney (the chimney-sweeper
must complete the installation report at the end of this Manual).
Special attention must be paid that there is enough air for combustion
being supplied to the room cooker is installed in.
Prior to commencing the firing procedure, the cooker MUST be
connected to waterworks and central heating installation. The
procedure may only be executed by an authorized expert who completes
the installation report at the end of this Manual.
Descending
wind
wind
A
B
C
D
figure 4
A-B zones in overpressure
C-D zones in underpressure