User's Manual

Prepared by KM 11/2015 15 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | [e-mail]
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
13. Center the sensor head on the back of the device to be protected.
14. Press rmly for about 15 seconds for a strong adhesive bond.
15. Plug the micro USB power cable into the device’s charging port.
G. Connecng sensor heads to cordwinder cables
1. Pull a length of the cordwinder cable from the cradle and bring the sensor head to it.
2. Insert the cable end into the hole in the back of the sensor head. Then turn the cable end a quarter turn clockwise. You will hear and feel a
click when the cable is locked.
3. The cable end will sll rotate about a quarter turn but will not come out without using the cable release key.
H. Disconnecng sensor heads from cordwinder cables
1. Insert the cable release key into the hole in the side of the sensor head. The key is exible to prevent damage to internal components.
2. You will feel a click when the cable end is unlocked. Turn the cable end about a quarter turn counter-clockwise and pull it out of the sensor
head.
3. The protected device is now released from the mechanical security while sll being monitored by the wireless system.