User's Manual
Prepared 10/2016 15 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
1. Place the Main Alarm unit in clear line of sight within 50 feet of the display xtures and Security Perimeter Domes. Avoid mounng near the
oor or with large metal objects, metal cabinets, other equipment, etc. in close proximity to the Main Alarm or between the Main Alarm
and the display xtures. The Main Alarm should be at least 2 feet away from the nearest sensor head, and its antenna should be posioned
vercally 90°.
2. The Main Alarm’s USB-A cable should already be plugged into the Cloud Interface and the Cloud Interface should have beeped twice aer
being connected to AC power. (See secon B above.)
3. Plug the barrel plug end of the power cable into the power port on the Main Alarm.
4. Plug the power cable into an outlet that has AC power available.
1. Screw the shorter antenna into the le posion labeled WLAN and the taller antenna into the right posion labeled 3G/GPRS. Posion both
antennas vercally.
2. Plug the USB-A cable from the Main Alarm into the USB port on the Cloud Interface.
3. Plug the barrel plug end of the power cable into the power port on the Cloud Interface.
4. Plug the power cable into an outlet that has AC power available. Listen and conrm Cloud Interface beeps twice.
5. Place the Cloud Interface within reach of the Main Alarm USB-A cable, but make sure the Main Alarm and Cloud Interface antennas are
spaced at least one foot apart. Avoid placing the Cloud Interface inside of cabinets, near the oor or near metal.
C. Main Alarm
13. There is a red LED on the boom of the cradle which will be lit when the cradle is receiving power. This LED is not visible when the cradle is
on the cradle mounng plate.
14. Repeat as necessary for addional cradles.
B. Cloud Interface