User's Manual

Prepared 10/2016 22 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | [e-mail]
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
VIII. Disarming the Main Alarm
A. Insert DaKey in Main Alarm.
B. Press and hold buon 3 seconds to reset the system. LCD will state “Release to reset.”
C. Wait for all sensors to be found. Repeat step B if not all sensors are found.
D. LCD will state, “Remove key to arm system.” The system will remain disarmed unl the key has been removed.
E. Note: Use this procedure
1. When moving displayed device for overnight storage
(see instrucon 120-004 Genesis - Securing Product O Display While Store Closed)
2. When changing aached device
(see instrucon 120-005 Genesis - Changing Aached Product)
3. When removing sensor head(s) permanently.
(see instrucon 120-006 Genesis - Removing Sensor Head from System)
IX. Hard Reset
The enre system can be reset by inserng a recognized DaKey, unplugging power from the Main Alarm unit, and then holding down the buon
on the front of the Main Alarm for longer than 10 seconds.