User Manual
Table Of Contents
- IE 80S BT
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Selecting suitable ear adapters for optimum fit of the headphones
- Inserting the earphones into the ears
- Switching the headphones on
- Retrieving information on the battery charge status
- Adjusting the volume
- Adjusting the bass response
- Using the voice assistant/voice dialing
- Controlling the music playback
- Making phone calls using the headphones
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Exchanging the earphones
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- The headphones cannot be switched on?
- The headphones cannot be charged?
- The operating time is decreasing?
- The sound occasionally drops out?
- The sound is too low?
- The headphones sound misadjusted?
- The sound is not in lip-sync with the TV/PC picture?
- The headphones are uncomfortable?
- The headphones are connected via the Smart Control app, but music playback is not possible?
- Leaving the Bluetooth transmission range
- Restarting the headphones
- Resetting the headphones to the factory default settings/Reset
- Specifications
- Manufacturer Declarations
Using the headphones
16 | IE 80S BT
Switching the headphones on
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
he
aring defects.
▷ Before putting the headphones on, adjust the volume
to a low level (> 17).
▷ Do not continuously expose yourself to high volume
levels.
ON
2s
Hold
“Power on“
2s
▷ Press the multi-function button for 2 seconds.
The headphones switch on. You hear the voice prompt “Power on”
a
nd the LED lights up green for 2 seconds.
If a paired Bluetooth device is within the transmission range, you
he
ar the voice prompt “Device (1) connected”. The LED lights up
blue for 3 seconds.
Make sure that Bluetooth is already activated on your Blue-
tooth device when switching on the headphones.
If Bluetooth is activated and the headphones cannot find a
paired Bluetooth device within a few minutes, you hear the
voice prompt “No device found”. The LED lights up red for
3
seconds. The headphones switch to standby mode.
Switching the headphones off
OFF
3s
Hold
“Power off“
▷ Press the multi-function button for 3 seconds.
You hear the voice prompt “Power off” and the LED flashes red
3 times.
The headphones automatically switch to standby mode if no
paired Bluetooth device can be found within 3 minutes. You can
wake up the headphones from standby mode by pressing the
multi-function button for approx. 2 seconds.