User Manual

CX 6.00BT | 15
Getting started
Pairing the headphones with a Bluetooth device
Ensure that the headphones are off and within the 20 cm range of your
smartphone when performing this procedure.
The headphones automatically go to pairing mode when switched on
for the first time.
1. Press the multifunction button for 4 seconds.
You hear the voice prompt “power on”, followed by a beep sound. The
LED flashes blue and red. The headphones are in pairing mode.
2. Activate Bluetooth on your smartphone.
3. On your smartphone, start a search for Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone are
displayed.
4. From the list of Bluetooth devices found, select “CX6.00BT”. If necessary,
enter the default PIN code “0000”.
If pairing was successful, you hear the voice prompt “connected”. The
LED flashes blue 3 times.
Menu
Add Device
Menu
Bluetooth on
Bluetooth off
CX 6.00BT
CX 6.00BT
Keyword: 0000
3
4
1
2
1s 1s
› connected ‹
4s
< 20 cm
If no connection is established within 5 minutes, pairing mode is
terminated and the headphones switch off. If necessary, repeat the
pairing procedure.