Manualshelf

User Guide

ManualsBrandsSennheiser Consumer Audio ManualsElectronicsSennheiser PXC 550 Wireless – NoiseGard Adaptive Noise Cancelling, Bluetooth Headphone with Touch Sensitive Control and 30-Hour Battery Life
41424344454647484950
PXC 550 | 47
Troubleshooting
Clearing previously paired devices
Ensure that Bluetooth is activated on the headphones when performing this
procedure.
1. Restart the headphones by switching them off and on again (see pages 22
and 23).
2. Press the Effect Mode Control button for 4 seconds.
You hear tones and the voice prompts “phone x disconnected” and “pairing”
and the LEDs flash white in sequence.
3. Press the Effect Mode Control button again for 4 seconds until you hear tones
and the voice prompt “pairing list cleared”.
The LEDs flash white in sequence. The headphones are permanently
disconnected from all devices and go into pairing mode.
Effect Mode Control
› power on ‹
› power off ‹
4s
Effect Mode Control
4s
› pairing list cleared ‹