User Manual

Using your RS 185 headphone system
RS 185 | 21
Selecting an audio input
If both analog and digital audio inputs are connected to different audio
sources, the headphone system enables you to toggle between the two
inputs.
왘 Push the AUDIO INPUT SELECTION switch up to listen
to an
audio source
connected to the digital optical input (see page 13).
왘 Push the AUDIO INPUT SELECTION switch down to listen to an audio
source
connected to the analog input (see pages 14 and 15).
Adjusting the volume
왘 Press the Volume + button or the Volume – button repeatedly until the
volume is adjusted to the desired level. When the minimum or maxi-
mum volume setting is reached, you hear a beep in the headphones.
Muting/unmuting the headphones
왘 Press the HDR power button to mute the headphones.
왘 Press the HDR power button or any of the Volume +/–, Balance L/R
buttons to cancel the muting.
Digital
Analog
L
EVEL
LE
VEL
VolVol
If the headphones are muted for 15 minutes, the headphones switch
off automatically to save energy.
LEVEL LEVEL