User Manual

GuidePort: Software Description 27. Juli 2000 Seite 16
1. First select a cell. All events in this cell will be displayed on a list.
2. Select an event name from the list.
3. Choose the „Antenna“ to be used (internal ferrit antenna or external loop
antenna), the „Power“ required (from 10% to 100%, adjustable in steps of
10%) and the „Cycle“, i.e. the time after which the identifier signal is to be
repeated, adjustable from 0.5s to 1s in steps of 0.05s)
4. Use the [+] and [–] buttons under „Start“ and „Stop“ to enter the starting
time and end of identifier transmission, for example from 7 a.m. until 6 p.m.
The below screenshot shows a complete list:
Now you need to transmit the identifier parameters to the palmtop. The palmtop will
enable you to program the magnetic field identifiers.
1. Start the GuidePort application on your palmtop.
2. Put the palmtop into the docking station connected to your Central Unit
PC. N.B.: The desktop organizer software of your palmtop has to be
closed before transmission can start!
3. Select the main menu of the GuidePort application on your palmtop. Then
choose „Read Database“ from the „File“ menu.
Now click [Transfer Data] on the „Identifiers“ page of the „GuidePort Central Unit“
software to transfer the identifier parameters to the palmtop. The following window
will be displayed: