User's Guide

Operating a delegate unit
10 | ADN C1/ADN D1 | ADN-W C1/ADN-W D1
Operating a delegate unit
The operation of the ADN D1 wired conference unit and the ADN-W D1
wireless conference unit is identical.
Taking the floor/Making a request to speak
If the conference mode is set to “Direct Access” or “Override” (detailed
information can be found in the ADN system manual):
왘 Press the microphone key .
Your microphone switches on and you can take the floor
immediately. The microphone LED and the signal light ring
light up red. The loudspeaker is muted. Depending on the
conference mode and the speaker limit set, the microphone of the
previous speaker will be deactivated.
If the conference mode is set to “
Push to talk”:
왘 Press the microphone key and keep it pressed for the duration
of your contribution.
Your microphone switches on and you can take the floor
immediately. The microphone LED and the signal light ring
light up red. The loudspeaker is muted.
If the conference mode is set to “
Request”, you have to be granted
speaking privileges:
왘 Press the microphone key .
Depending on the setting adjusted in the operating menu (detailed
information can be found in the ADN system manual)
– the microphone LED flashes green and the signal light ring
flashes red or
– only the microphone LED flashes green.
When the chairperson grants you speaking privileges, your
microphone is activated. The microphone LED and the signal
light ring light up red. The loudspeaker is muted. Depending
on the conference mode and the speaker limit set, the microphone
of the previous speaker will be deactivated.
2
8
7
7
8
2
9
7
8
2
9
7
8
2
8
8
2
9