User's Guide

ENFRESRUNL ITJADA ZHFINO SV DE
Cleaning and maintaining the conference units
ADN C1/ADN D1 | ADN-W C1/ADN-W D1
|13
왘 Briefly press the priority key .
The conference system behaves as set.
Muting all delegate units temporarily (priority function)
Using the priority function, the chairperson can interrupt a discussion
at any time. The speaking privileges of all chairperson units remain
active at any time.
왘 Keep the priority key pressed for as long as you want to mute
the delegate units.
All conference units – except for the chairperson units – are muted
immediately. The microphone LED and the signal light ring of
the previously active conference units flash red. You can take the
floor immediately. The microphone LED and the signal light
ring of your chairperson unit light up red.
왘 Release the priority key .
The muting of the conference units is canceled. The discussion is
continued.
Cleaning and maintaining the conference
units
왘 Remove the ADN-W BA battery pack from the ADN-W C1 or
ADN-W D1 wireless conference units (see page 7).
왘 Only use a dry and soft cloth to clean the products.
왘 Clean the grids of the conference units with a soft brush or
paintbrush in order to avoid dust deposits.
4
If you are using the “Conference Manager” software, you can
also deactivate all delegate units with a mouse (detailed
information can be found in the ADN system manual).
4
2
8
4
4
8
2
8
2
4