User's Manual

15
Preparing the units for use
Transmitter and receiver have been adapted by your technical expert to suit
your individual applications.
Transporting the transmitter and receiver
In addition to the EZB 2015 system case offering room to store all
components of the system, delivery also includes a transport case. This is
suitable for the day-to-day transport of a transmitter and a receiver and of
two replacement accupacks.
Push the transmitter and the receiver into the transport holding device as
shown on the left. This prevents damage to the units during transport and
fits snugly into the transport case.
Inserting the accupack/batteries (transmitter and receiver)
For pow ering the units, we rec ommend using the supplied BA 2015 accupack.
The accupack can be recharged in the L 2015 charger while remaining in the
unit (see operating manual of the charger). If no mains supply is ava ilable for
recharging the accupack, you can alternatively use 1.5 V AA size batteries.
 Press the two unlocking buttons  and open the battery compartment
cover .
 Insert the accupack or the batteries as shown on the left. Please observe
correct polarity when inserting the accupack or the batteries.
 Close the battery compartment. The battery compartment cover locks
into place with an audible click.
Note:
y For accupack operation, only use the BA 2015 accupack in order to
ensure optimum operational reliability. Batteries and rechargeable
Transport holding
Transport
case
device


