User's Manual
Table Of Contents
- Safety instructions
- Contents
- The 2015 System
- Delivery includes
- Operating controls of the EK 2015 receiver
- Operating controls of the SK2015 transmitter
- Preparing the units for use
- Using the receiver
- Using the transmitter
- Troubleshooting
- Care and maintenance
- Configuration of the units by the technical expert
- Specifications
- Accessories
- Notice d’emploi
- Pour votre sécurité
- Sommaire
- Le système 2015
- Fournitures
- Les éléments de commande du récepteur EK 2015
- Les éléments de commande de l’émetteur SK2015
- Utilisation quotidienne
- Utiliser le récepteur
- Utiliser l’émetteur
- En cas d'anomalies
- Entretien et maintenance
- Configuration des appareils par le spécialiste technique
- Caractéristiques techniques
- Accessoires
17
Connecting sound sources to the transmitter
Connecting the microphones to the transmitter
In addition to the supplied MKE 2015-2 clip-on microphone, a screw-on
microphone (MKE 2015-0) and a neckband microphone (ME 2015-H) are
available as optional accessories. DC powering of these condenser
microphones is via the microphone input.
Co nn ect the 2.5 mm jac k pl ug of the microphone or the microphone
cable to the transmitter’s 2.5 mm jack socket (MIC) .
Via the operating menu, adjust the sensitivity of the microphone input
(see “Adjusting the microphone sensitivity” on page 30).
Attaching and p os itioning the micro phones
The MKE 2015-2 clip-on microphone and the MKE 2015-0 screw-on
microphone with omni-directional pick-up pattern pick up sound equally
from all directions. They are the best choice if movements of the speaker’s
head have to be compensa ted fo r. However, they should be attached as close
as possible to the sound source.
Use the microphone clip to attach the MKE 2015-2 clip-on microphone to
clothing (e.g. tie, lapel). Atta ch the microphone at a maximum distance of
25 cm from your mouth.
When using the MKE 2015-0 screw-on microphone (optional accessory),
wear the transmitter around your neck using the EZG 2015 pouch with neck
strap. Adjust the length of the neck strap so that the distance between the
microphone and your mouth is 25 cm at the most.
The ME 2015-H neckband microphone has a super-cardioid pick-up pattern.
Adjust the ME 2015-H so that a comfortable and secure fit is ensured.
Position the microphone at the corner of your mouth.
Make sure that the sound inlet is direc ted towards y our mouth. The sound
inlet is marked with a little dot.