User's Manual
Table Of Contents
- Safety instructions
- Contents
- The 2015 System
- Delivery includes
- Operating controls of the EK 2015 receiver
- Operating controls of the SK2015 transmitter
- Preparing the units for use
- Using the receiver
- Using the transmitter
- Troubleshooting
- Care and maintenance
- Configuration of the units by the technical expert
- Specifications
- Accessories
- Notice d’emploi
- Pour votre sécurité
- Sommaire
- Le système 2015
- Fournitures
- Les éléments de commande du récepteur EK 2015
- Les éléments de commande de l’émetteur SK2015
- Utilisation quotidienne
- Utiliser le récepteur
- Utiliser l’émetteur
- En cas d'anomalies
- Entretien et maintenance
- Configuration des appareils par le spécialiste technique
- Caractéristiques techniques
- Accessoires
31
Switching between the channels
CHAN Via the “CHAN” menu, you can switch between the released channels. This
can be necessary when the selected channel is subject to interference.
With the 2015 System, a transm itter ca n be received by several receivers on
the same frequency. In this case, it may be nec essary to switch to a channel
that is released on all receivers.
Always set the transmitter and the receiver(s) of a transmission link to the
same channel. For multi-channel operation, only us e the released channels in
one channel bank and only use the channel banks “1” to “8” since these
accommodate fixed preset frequencies which are intermodulation-free.
Exiting the operating menu
EXIT Via the “EXIT” menu, you can exit the operating menu and return to the
stan da rd display.