User's Manual
Table Of Contents
- Safety instructions
- Contents
- The 2015 System
- Delivery includes
- Operating controls of the EK 2015 receiver
- Operating controls of the SK2015 transmitter
- Preparing the units for use
- Using the receiver
- Using the transmitter
- Troubleshooting
- Care and maintenance
- Configuration of the units by the technical expert
- Specifications
- Accessories
- Notice d’emploi
- Pour votre sécurité
- Sommaire
- Le système 2015
- Fournitures
- Les éléments de commande du récepteur EK 2015
- Les éléments de commande de l’émetteur SK2015
- Utilisation quotidienne
- Utiliser le récepteur
- Utiliser l’émetteur
- En cas d'anomalies
- Entretien et maintenance
- Configuration des appareils par le spécialiste technique
- Caractéristiques techniques
- Accessoires
37
Selecting a menu
Press the / rocker butto n (UP/DOWN) to select a menu.
Press the SET button to get into the setting mode of the selected menu.
The current setting that can be adjusted flashes on the display.
Adjusting a setting
Press the / rocker button (UP/DOWN) to adjust the setting.
By briefly pressing the / rocker button, the display jumps either
forwards or backwards to the next setting. In the “FA DE”,“TUNE“,“NAME“
and “ACCESS” menu, the / rocker button features a “fast search”
function: If y ou hol d down the or button, the display cycles
continuously, allowing you to get fa st and easily to y our desired setting.
The new setting flashes on the display until it is stored.
Storing a setting
Press the SET button to store the setting. “STORED” appears on the
display, indicating that the setting has been stored. The display then
returns to the top menu level.
With most menus, new settings become effective immediately without
having to be stored. An exception are the “RESET” menu s of both
transmitter and receiver and the “TUNE” menu of the transmitter. With
these menus, new settings only become effective after they have been
stored.
Exiting the configuration menu
When in the configuration menu, briefly pressing the ON/OFF button will
cancel your entry (ESC function) and return you to the “SETUP” display
without storing the setting.