User's Manual
12
• The LED 쐋 flashes red.
• Three beeps are heard in the speaker 3 times with an interval of 15
seconds and thereafter with an interval of 2 minutes.
• Less than 10 minutes of talk time are left.
Switching the headset on/off
f
Press the hook button 쐄 for more than 3 sec. until the LED 쐋 lights
up blue.
The headset is switched on. The LED 쐋 indi-
cates the current operating mode:
– If the LED 쐋 flashes slowly in blue, the
headset is already paired to a mobile
phone. The headset is therefore ready to
use.
– If the LED 쐋 flashes alternatingly in red
and blue, the headset is not yet paired to
a mobile phone. Pair it as described under “Pairing the headset to
mobile phones or other Bluetooth devices” on page 13.
– If the headset is already paired to a mobile phone and if there is
an incoming call on your mobile phone, the call is answered imme-
diately by a single tap on the hook button 쐄.
To switch off the headset:
f Press the hook button 쐄 for more than 3 sec. until the LED 쐋
flashes red and then turns off.
All settings are saved. The battery lasts longer, if you switch off the
headset when you are not using it.
쐋
쐄