User's Manual

Putting the headset into operation
Presence | 13
Pairing the headset with a Bluetooth device
The following chapter describes, by way of example of a mobile phone,
how to pair the headset with a Bluetooth device. In case of deviation,
proceed as described in the instruction manual of your mobile phone.
1 Switch the headset off (see page 16).
2 Keep the multi-function button pressed and gently pull the power on/
off slider away from the headset. The LED alternately flashes blue and
red. The headset is in pairing mode.
3 Enable the Bluetooth visibility on your mobile phone.
4 On the mobile phone, start a search for Bluetooth devices. All available
devices in the proximity of the mobile phone are displayed.
5 From the found Bluetooth devices, select “Sennheiser Presence” to
establish a Bluetooth connection to the headset. If necessary, enter the
default PIN code “0000”.
6 Once the headset is paired with the mobile phone, the LED goes off.
If pairing is not successful within 5 minutes, the headset automatically
returns to connectable mode. Repeat the pairing procedure.
1
3
6
4
20 cm
Menu
Bluetooth on
Bluetooth o
”Pairing successful”
2
on
”Pairing“
press and hold
4s
5
Sennheiser Presence
Sennheiser VMX 200
Sennheiser Presence
Keyword:
0000
Menu
Add device
off
3x