User's Manual

Using the headset

16 | Presence

Switching the headset on/off

Switching the headset on and connecting it

The headset can save the connection profiles of up to eight Bluetooth

devices with which it has been paired (“paired”, see page 12). However,

only two of the paired Bluetooth devices can be simultaneously connected

to the headset (“paired + connected”). After switch-on, the headset

automatically tries to connect to the two last connected Bluetooth devices.

왘 Enable the Bluetooth visibility on one or two of the paired Bluetooth

devices. If necessary, disable the Bluetooth visibility on other paired

Bluetooth devices in the proximity of the headset.

왘 Gently slide the power on/off slider away from the headset. The LED

flashes blue 3 times. The voice prompt “power on” is announced in the

headset.

The headset can connect to up to two of the paired mobiles phones or

Bluetooth dongles. The LED flashes 3 times blue every 2 seconds and

goes off once a connection to the first Bluetooth device is successfully

established. One or several of the following voice prompts are

announced in the headset:

– “Phone one connected” for the first mobile phone

– “Phone two connected” for the second mobile phone or

– “Dongle connected” for the Bluetooth dongle.

Switching the headset off

왘 Slide the power on/off slider away from the headset.

The voice prompt “power off” is announced in the headset and the LED

flashes red 3 times. The headset ends the call and switches off.

paired

paired +

connected

Connection profiles and volume settings are saved automatically

when the headset is switched off.

1. ”power on“

2. „... connected“

”power off“