User's Manual

Using the headset

18 | Presence

Changing the volume

You can adjust three independent volume settings for the headset:

• speaker volume: can be adjusted during an active call,

• audio volume: can be adjusted during music reproduction,

• volume for the ring tone, the beeps and the voice prompts:

can be adjusted in idle mode (no active call or music reproduction)

왘 Press the

– Volume + button to increase the volume.

– volume – button to reduce the volume.

When the minimum or maximum volume is reached, the voice prompt

“Volume min” or “Volume max” is announced in the headset. When the

voice prompts are disabled, you hear a beep in the headset.

Swapping the +/– assignement of the Volume buttons

You can swap the +/– assignment of the Volume buttons If, for example,

you want to wear the headset on the other ear (see page 14).

왘 Keep both Volume buttons pressed for 2 seconds to swap the +/–

assignment of the buttons. The voice prompt “swap volume keys” is

announced in the headset.

Vol +

Vol –

WARNING

Hearing damage due to high volumes!

Listening at high volume levels for long periods can lead to perma-

nent hearing defects.

왘 Set the volume to a low level before putting on the headset.

왘 Do not continuously expose yourself to high volumes.

2 s