User Manual

Advanced settings
23
Activating/deactivating the adaptive volume ad-
justment
If you wish to deactivate the adaptive volume adjustment:
f Press and hold down the program button  and additionally press the
base station hook buttonBase station hook button .
The hook LEDHook LED  flashes red twice to indicate that the adap-
tive volume adjustment is deactivated.
If you wish to reactivate the adaptive volume adjustment:
f Press and hold the program button  and additionally press the base
station hook buttonBase station hook button .
The hook LEDHook LED  flashes blue twice indicating that the adap-
tive volume adjustment is activated.
Note:
If you get out of range of the base station, the adaptive volume ad-
justment is activated!
Pairing
Upon delivery, the headset and the base station are already paired , i.e.
they automatically recognize each other and do not interfere with other
Bluetooth devices. You do not have to pair them again.
However, if you have to replace the headset with a new one, e.g. because
it is damaged, the base station will not recognize the new headset unless
they are paired as follows:
f Press the program button  quickly two times.
The base station is set to pairing mode. The hook LEDHook LED 
flashes blue.
f Press and hold down for 4 seconds the headset hook buttonHeadset
hook button  and the multi switch .
The headset LEDHeadset LED  lights up blue and red and then
flashes blue to indicate that the headset is in pairing mode.
Note:
If pairing is not successful within 60 seconds, the headset returns to
standby mode.
The pairing process starts automatically. When pairing has been success-
ful, the blinking stops and the headset LEDHeadset LED  and the base
station hook LED  quickly flash blue three times.






4 Sec.
