User Manual

Putting the headset system into operation

Adjusting the audio signal/dial tone



 Set the ABC switch to A (default setting), B or C so that you can hear a

clear dial tone in the headset.

Adjusting the microphone sensitivity

By default, the microphone volume control  is set to between position 4

and position 5. This setting is suitable for most telephones and your voice

gets reproduced at a good volume. To change the volume, adjust the

microphone volume control accordingly.



The microphone volume control  only adjusts the microphone

sensitivity in Phone mode.

 Make a call to someone who will help you find the correct sensitivity

setting for your microphone (see page 25).

 Turn the microphone volume control  so that the other party can hear

at a comfortable level.