Book_XXXXXX_0308_Sp6.book Seite 1 Mittwoch, 6.
Book_XXXXXX_0308_Sp6.book Seite 2 Mittwoch, 6.
Book_XXXXXX_0308_Sp6.book Seite 1 Mittwoch, 6.
Book_XXXXXX_0308_Sp6.book Seite 2 Mittwoch, 6.
Book_XXXXXX_0308_Sp6.book Seite 1 Mittwoch, 6. Februar 2008 10:59 10 Contents Important safety instructions ............................................. 2 MX W1 digital wireless earphone system ......................... 4 Delivery includes .................................................................... 4 Product overview ................................................................... 5 LED indications of the devices ...................................................
Book_XXXXXX_0308_Sp6.book Seite 2 Mittwoch, 6. Februar 2008 10:59 10 Important safety instructions The MX W1 has been manufactured according to the accepted rules of safety and current technology. However, there is still a danger of damage to equipment if the following general safety instructions are not complied with. • Please read these instructions for use carefully and completely before using the devices. • Make these instructions for use easily accessible to all users at all times.
Book_XXXXXX_0308_Sp6.book Seite 3 Mittwoch, 6. Februar 2008 10:59 10 Safety instructions for Lithium-Ion rechargeable batteries If abused or misused, rechargeable batteries may leak. In extreme cases, they may even present a • heat hazard • explosion hazard • fire hazard • smoke and gas hazard Please understand that Sennheiser does not accept liability for damage arising from abuse or misuse. Keep away from Observe correct polarity. children. Do not heat above 70°C/158°F, e.g.
Book_XXXXXX_0308_Sp6.book Seite 4 Mittwoch, 6. Februar 2008 10:59 10 MX W1 digital wireless earphone system Thank you for purchasing MX W1 - Sennheiser's completely digital wireless earphone system. We trust that you will enjoy using it and that it will satisfy your expectations. The MX W1 is simple to operate. These instructions for use have been designed to help you get started. Please take some time to read them carefully so as to ensure your utmost listening pleasure.
Book_XXXXXX_0308_Sp6.book Seite 5 Mittwoch, 6. Februar 2008 10:59 10 Product overview Earphones 쐋 Twist-to-fit pad Speaker LED (orange/blue) Operation/pairing button of the earphone 2.5 mm charging jack Battery compartment Transmitter Operation/pairing button of the transmitter Reset button LED (orange/blue) 2.5 mm charging jack Connecting cable with 3.
Book_XXXXXX_0308_Sp6.book Seite 6 Mittwoch, 6. Februar 2008 10:59 10 Docking station Charging compartment for earphones Charging plugs for earphones (inside the charging compartment) LED (orange/red) Charging button 2.
Book_XXXXXX_0308_Sp6.book Seite 7 Mittwoch, 6. Februar 2008 10:59 10 Charging the devices To charge the devices (simultaneously or separately): 왘 Connect the charging cable to the power supply unit . 왘 Connect the suitable country adaptor to the power supply unit . 왘 Connect the charging cable to the charging jack of: – the transmitter and the docking station – or the earphones .
Book_XXXXXX_0308_Sp6.book Seite 8 Mittwoch, 6. Februar 2008 10:59 10 Note: – Alternatively, you can charge the devices by connecting the USB plug of the charging cable to the USB port of a PC (see illustration). – The transmitter has its own built-in rechargeable battery. So it will not drain your audio device’s battery. – With a fully charged rechargeable battery, the operating time of the transmitter is approx. 10 hours and of the earphones approx. 3 hours.
Book_XXXXXX_0308_Sp6.book Seite 9 Mittwoch, 6. Februar 2008 10:59 10 Associating the earphones to the transmitter (Pairing) The MX W1 earphones and transmitter are already paired on delivery. To enable wireless transmission, both the earphones and the transmitter have to recognize each other: 1. Enrollment mode After switch-on, a suitable device is searched. 0 1s 2s 2. Association mode If a suitable device is detected, both devices will exchange device identification information. 0 1s 2s 3.
Book_XXXXXX_0308_Sp6.book Seite 10 Mittwoch, 6. Februar 2008 10:59 10 Associating a second pair of earphones to the transmitter With one transmitter you can associate up to two pairs of earphones. If you want to use another pair of earphones, you have to pair your transmitter and the new earphones: 왘 Switch the new earphones off (see page 14). 왘 Switch the transmitter and the already paired earphones on (see page 14). ON ON OFF 왘 Switch the transmitter off (see page 14).
Book_XXXXXX_0308_Sp6.book Seite 11 Mittwoch, 6. Februar 2008 10:59 10 왘 Press and hold the operation/pairing button of the transmitter until the LED flashes rapidly. 7s ON ON ON After approx. 3 seconds, the new earphones are also paired to the transmitter. The LEDs flash blue once every 5 seconds. ON ON ON Note: The distance between transmitter and earphones should not exceed 1 m during association.
Book_XXXXXX_0308_Sp6.book Seite 12 Mittwoch, 6. Februar 2008 10:59 10 Setting up your MX W1 for usage Fixing the transmitter to your audio device Fix the transmitter with the help of: • the fabric strap • or one of the rubber bands (see illustration). Connecting the transmitter to your audio device You can connect the transmitter to an MP3 player or any audio device with a 3.5 mm stereo headphone socket: 왘 Connect the stereo plug of the transmitter to the 3.
Book_XXXXXX_0308_Sp6.book Seite 13 Mittwoch, 6. Februar 2008 10:59 10 Adjusting the earphones to your ears Sennheiser’s twist-to-fit system and comfortable earpads allow for the best custom fit enabling you to enjoy seamless high fidelity stereo sound. The perceived sound quality of the earphones depends to a large extent on a correct fit. For best sound enjoyment, please use the supplied earpads and twist-tofit pads.
Book_XXXXXX_0308_Sp6.book Seite 14 Mittwoch, 6. Februar 2008 10:59 10 Using the MX W1 To switch the system on, proceed as follows: 1. Switch your audio device on. 2. Switch the earphones on (see following chapter). 3. Switch the transmitter on (see page 15). 4. Put the earphones on (see page 15). You will hear the sound from your sound source.
Book_XXXXXX_0308_Sp6.book Seite 15 Mittwoch, 6. Februar 2008 10:59 10 Note: – When you insert the earphones into the docking station, the earphones automatically switch off. – If there is no transmitter in enrollment mode for at least 5 minutes, the earphones automatically switch off. Switching the transmitter on/off To switch the transmitter on: 왘 Press and hold the transmitter’s operation/pairing button until the LED flashes blue. 0 4s The tranmitter switches on.
Book_XXXXXX_0308_Sp6.book Seite 16 Mittwoch, 6. Februar 2008 10:59 10 Putting on the earphones CAUTION! Danger of hearing damage! Listening at high volume levels for long periods can lead to permanent hearing defects. Sennheiser earphones also sound exceptionally good at low volumes. 왘 Set the volume of the audio device to the minimum before switching the earphones on. 왘 Check the R (right) an L (left) marks on the earphones to identify them and put on the earphones as shown in the illustration above.
Book_XXXXXX_0308_Sp6.book Seite 17 Mittwoch, 6. Februar 2008 10:59 10 Care and maintenance Cleaning the devices CAUTION! Liquids can damage the electronics of the devices! Liquids entering the housing of the devices can cause a short-circuit and damage the electronics. 왘 Keep all liquids away from the devices. 왘 Do not use any cleansing agents or solvents. For reasons of hygiene, clean your Sennheiser products regularly. 왘 Before cleaning, disconnect the devices from the mains.
Book_XXXXXX_0308_Sp6.book Seite 18 Mittwoch, 6. Februar 2008 10:59 10 Replacing the earphones’ rechargeable batteries CAUTION! Danger of damage to the devices! Rechargeable button cells from other manufacturers may cause damage to the earphones and will invalidate the warranty. 왘 Only use original Sennheiser rechargeable button cells (see page 22). 왘 Slightly lift the end of the caps and slide the caps out of the guide rails. 왘 Insert the new rechargeable batteries as shown.
Book_XXXXXX_0308_Sp6.book Seite 19 Mittwoch, 6. Februar 2008 10:59 10 Get the most out of your Sennheiser MX W1! Your Sennheiser MX W1 uses the latest digital wireless transmission technology. This technology offers high transmission quality and reliability but, like other wireless technologies, can also be influenced by various factors such as: • objects or walls, as these can reflect (amplify) or attenuate the transmitted signal.
Book_XXXXXX_0308_Sp6.book Seite 20 Mittwoch, 6.
Book_XXXXXX_0308_Sp6.book Seite 21 Mittwoch, 6.
Book_XXXXXX_0308_Sp6.book Seite 22 Mittwoch, 6. Februar 2008 10:59 10 Accessories and spare parts The following accessories are available from your authorized Sennheiser dealer: Cat. No. Accessory/Spare part 525766 Carrying case 525767 MX W1-C docking station 525768 MX W1-T transmitter 525769 Transmitter straps: 1 elastic fabric strap, 4 rubber bands (2 x S/2 x L) 525770 Lithium-ion rechargeable button cell (2 pieces) for the earphones , 40 mAh, 3.
Book_XXXXXX_0308_Sp6.book Seite 23 Mittwoch, 6. Februar 2008 10:59 10 Specifications System Modulation Carrier frequencies Range Power supply unit with country adaptors Operating temperature MSK Digital 2.4 – 2.48 GHz approx. 10 m in open area 100 – 240 V, 50/60 Hz, 5 V DC/0.5 A (x 2) 0 – 40 °C Transmitter Audio connection Charging time of rechargeable battery Power supply Operating time Weight Dimensions 3.5 mm stereo jack socket approx. 2 hrs Input: 5 V DC/120 mA approx. 10 hrs approx. 16 g approx.
Book_XXXXXX_0308_Sp6.book Seite 24 Mittwoch, 6. Februar 2008 10:59 10 Docking station Charging time of rechargeable battery Power supply Weight Dimensions approx. 2 hrs Input: 5 V DC/400 mA Output: 5 V DC/100 mA approx. 42 g approx. 71 x 26 x 74 mm “kleer” wireless technology The MX W1 is based on “kleer” digital wireless transmission technology.
Book_XXXXXX_0308_Sp6.book Seite 25 Mittwoch, 6. Februar 2008 10:59 10 Statements regarding FCC and industry Canada FCC Declaration of Conformity (DoC) SENNHEISER Model No:MX W1 We, Sennheiser Electronic Corporation Strat. Marketing • Stefanie Reichert One Enterprise Drive • Old Lyme • CT 06371 • USA Tel: +1 (860) 434 9190, ext. 144 Fax: +1 (860) 434 1759 declare the above device comply with the requirements of Federal Communications Commission. This device complies with Part 15 of the FCC rules.
Book_XXXXXX_0308_Sp6.book Seite 26 Mittwoch, 6.
Book_XXXXXX_0308_Sp6.book Seite 1 Mittwoch, 6. Februar 2008 10:59 10 Sennheiser electronic GmbH & Co. KG Am Labor 1 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.
