User's Manual

Putting the radio microphone into operation

Inserting batteries into the B 5000-2 battery box

To ensure the longest operating time possible, only use alkaline manga-

nese batteries for the B 5000-2 battery box.

LC display shown on the example of the B 5000-2 battery box

Recharging the BA 5000-2 battery pack

Before using the BA 5000-2 battery pack for the first time or if you have

not used it for several weeks, you must charge the battery pack comple-

tely.

The L 50 charger can charge two BA 5000-2 battery packs simultaneously.

After you have changed the power pack, the radio microphone con-

tinues operating on exactly the same settings as before the change.

Stored settings are retained in memory on switch-off.

 To open the battery box, push down the

display section  of the battery box .

 Insert the batteries. Observe correct pola-

rity when inserting the batteries.

 Close the battery box.

• 3-step LC display for remaining battery

capacity.

• If the battery capacity is too low (LOW

BATT), the last segment starts flashing

and the batteries must be changed.



LOW BATT