User's Manual

19
The operating menu
Changing to the selection mode
To change from display mode to selection mode, you have to deactivate
the lock mode.
 Deactivate the lock mode (see “Deactivating the autolock function
temporarily” on page 15). You can now select the menu whose set-
tings you want to adjust.
 Press the multi-function switch  (
switch position SET) to change to
the menu that was displayed in display mode.
Selecting a menu
Changing to the setting mode of a selected menu
Adjusting a setting
 Use the multi-function switch  to adjust the setting of the selected
menu.
By briefly sliding the multi-function switch  to the position
 (UP)
or  (DOWN), the display jumps either forwards or backwards to the
next setting.
In the “ATTEN”, “CHAN”, “TUNE” and “NAME” menu and when slid to
the position
 (UP) or  (DOWN), the multi-function switch features
a “fast search” function, i.e. the display cycles continuously. In the
 Slide the multi-function switch  to the
position  (UP) or  (DOWN)
to display the
menu settings
. If you slide the multi-function
switch repeatedly to the same position, all
menu settings are displayed one after the
other.
 Slide the multi-function switch  to the
position  (UP) or  (DOWN).
 Press the multi-function switch  (
switch
position
SET).
The name of the selected menu starts flas-
hing.
 Press the multi-function switch  (
switch
position
SET) to change to the setting
mode of the selected menu.
The current setting that can be adjusted flas-
hes on the display.
SET
DOWN
UP

SET
DOWN
UP

SET
DOWN
UP
