User's Manual

Adjustment tips for the operating menu

Adjustment tips for the operating

Selecting a channel – “CHAN”

Via the “CHAN” menu, you can switch between the channels in the channel

banks “FIX” and “VAR“. The radio microphone is not transmitting while

this adjustment is being made.

When changing to the setting mode of the “CHAN” menu, the current

channel number appears on the display. After approx. 1 second, the cur-

rently assigned frequency is displayed.

 To select a different channel, slide the multi-function switch  to the

position  (UP) or  (DOWN). The new channel number appears on

the display panel  for approx. 1 second and then the currently assi-

gned frequency is displayed.

Only after the new setting has been stored (“STORED” has appeared

on the display panel ) does the transmitter operate on the transmis-

sion frequency of the new channel.

Selecting the frequencies to be stored in

the channel bank “VAR” – “TUNE”

Via the “TUNE” menu, you can freely select the frequencies to be stored in

the channel bank “VAR” (variable bank). The radio microphone is not

transmitting while this adjustment is being made.

When setting frequencies on the bodypack transmitter, please

observe the following:

 Make sure that the desired frequencies are listed in the enc-

losed frequency table.

 Make sure that the desired frequencies are approved and legal

in your country and, if necessary, apply for an operating

license.

1 sec.

MHz