User's Manual

28
Maintenance and care
Adjusting the output power – “POWER”
The radio microphone features switchable output power. With reduced
output power, the operating time increases.
In addition, you can also adjust the radio microphone to “Low Intermodu-
lation mode” (“LoI”). By so doing, the radio microphone’s intermodulation
performance is significantly improved, especially in multi-channel opera-
tion. In “Low Intermodulation mode”, the output power is reduced to
10 mW; the operating time will be about the same as using an output
power of 50 mW.
Displaying the software revision – “SW--
REV”
You can display the current software revision of the radio microphone by
calling up the “SW--REV” menu item.
Exiting the operating menu – “EXIT”
Via the “EXIT” menu, you can exit the operating menu and return to the
standard display.
When in the operating menu, briefly pressing the ON/OFF button  will
cancel your entry (ESC function) and return you to the standard display
without saving any changes.
Maintenance and care
 Use a cloth to clean the radio microphone from time to time.
 Do not use any solvents or cleansing agents.
CAUTION! Liquids can damage the electronics of the radio micro-
phone!
Liquids entering the housing of the device can cause a
short-circuit and damage the electronics.
 Keep all liquids away from the radio microphone.