SR 2000 IEM SR 2050 IEM Instruction manual
Contents Contents Important safety instructions ............................................................................................................................................................. 2 The SR 2000 IEM and SR 2050 IEM transmitters ............................................................................................................................. 4 The frequency bank system ........................................................................................................
Important safety instructions Important safety instructions 1. Read these instructions. 2. Keep these instructions. Always include these instructions when passing the transmitter on to third parties. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
Important safety instructions This symbol is intended to alert the user to the risk of electric shock if the transmitter is opened. There are no user serviceable parts inside. Refer servicing to qualified personnel only. This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying this transmitter. Overloading Do not overload wall outlets and extension cables as this may result in fire and electric shock.
The SR 2000 IEM and SR 2050 IEM transmitters The SR 2000 IEM and SR 2050 IEM transmitters With the SR 2000 IEM and SR 2050 IEM 2-channel/stereo monitoring transmitters, musicians, video and sound amateurs, reporters/broadcasters, etc. can directly monitor the received sound signals without troublesome cables or monitor speakers being required. In addition, the transmitters can also be used for any application where talkback signals are to be transmitted.
Delivery includes Each of the channels in the frequency banks “1” to “20” has been factory-preset to a fixed transmission frequency (frequency preset). The factory-preset frequencies within one frequency bank are intermodulation-free. These frequencies cannot be changed. For an overview of the frequency presets, please refer to the supplied frequency information sheet. Updated versions of the frequency information sheet can be downloaded from the corresponding product page on our website at www.sennheiser.
Product overview Product overview Overview of the SR 2000 IEM/SR 2050 IEM transmitter The SR 2050 IEM twin transmitter has the same operating elements as the SR 2000 IEM transmitter. All information contained in this instruction manual refers to both transmitters. SR 2050 IEM PEAK PEAK 0 -10 -20 -30 -40 AF I A 0 -10 -20 -30 -40 AF II B.Ch: 5.
Product overview Overview of the displays After switch-on, the transmitter displays the standard display. PEAK PEAK 0 -10 -20 -30 -40 AF I 0 -10 -20 -30 -40 AF II 햴 B.Ch: 5.14 **2050** 552.
Putting the transmitter into operation Putting the transmitter into operation Setting up the transmitter on a flat surface Do not fit the device feet when mounting the transmitter into a 19” rack. 왘 Clean the base of the transmitter where you want to fix the device feet. 왘 Fit the device feet to the four corners of the transmitter. 왘 Place the transmitter on a flat, horizontal surface. Please note that the device feet can leave stains on delicate surfaces.
Putting the transmitter into operation Connecting and positioning a remote antenna Use a remote antenna when the transmitter position is not the best antenna position for optimum transmission. You can choose between two antennas (see “Accessories” on page 23): • A 2003 UHF passive directional broadband antenna • A 1031 passive omni-directional broadband antenna 왘 Use a low-attenuation 50-Ω cable to connect the antenna to the transmitter.
Putting the transmitter into operation 왘 Guide the BNC connector of the BNC extension cable through the hole in the rack mount “ear” . 왘 Connect the BNC connector to the antenna output 왘 Screw the antenna holder to the BNC socket ( using the supplied washer . ( nut and . ( 왘 Secure the antenna holder to the rack mount “ear” of the transmitter using two of the supplied screws. If you are using the SR 2050 IEM twin transmitter: 왘 Mount the second BNC extension cable in the same way.
Putting the transmitter into operation Connecting an audio source to the input sockets PUSH PUSH FREQ RANGE-Dw 790-865 mHz ART NO 503841 SER NO 2518100095 FMO IC 2099A-SR20x0 DESIGNED AND MADE IN GERM ANT L(I) BAL AF IN + 22dBu MAX R(II) Stereo Transm RF OUT 왘 Use a suitable cable to connect the output of the audio source (e.g. mixing console) to the ¼” (6.3 mm) jack/XLR-3 combo socket BAL AF IN L(I) and/or BAL AF IN R(II) .
Putting the transmitter into operation Connecting devices to the output sockets FREQ FREQ RANGE-Dw RANGE-Dw 790-865 790-865 mHz mHz ART ART NO NO 503841 627945 SER SER NO NO 2518100095 251810043 FMO FMO IC IC 2099A-SR20x0 2099A-SR20x0 왘 Use a suitable cable to connect the audio input of a device (e.g.
Using the transmitter Using the transmitter To establish a transmission link, proceed as follows: 1. Switch the transmitter on (see below). 2. Switch the EK 2000 IEM receiver on (see the instruction manual of the receiver). The transmission link is established. It is vital to observe the notes on frequency selection on page 22. If you cannot establish a transmission link between transmitter and receiver: 왘 Make sure that transmitter and receiver are set to the same frequency bank and to the same channel.