User's Manual
EN Putting the RS 5000 into operation
10 | RS 5000
Connection possibility D: SCART socket (analog)
왘 Plug the SCART adapter* onto the stereo audio
cable.
왘 Connect the stereo audio cable to the blue 3.5 mm jack
socket of the transmitter.
왘 Connect the SCART connector to the SCART socket (mostly
labeled or ) of your audio source.
* optional accessory
Connecting the transmitter to the mains
1 Connect the connector of the power supply unit to the
yellow socket of the transmitter.
2 Select a suitable country adapter and slide it onto the
power supply unit until it clicks audibly into place.
3 Plug the power supply unit into the wall socket.
All LEDs on the transmitter light up for 5 seconds. The
transmitter is in standby mode.
D
Analog Audio
*
US
EU
UK
AU
2
1
3
Power
1A
1A
RS_5000_570727_0117_PRT.book Seite 10 Montag, 10. Oktober 2016 2:52 14