User's Manual

DEFRES EN

Putting the RS 5000 into operation EN

RS 5000 |13

Using the charging reminder function

When the stethoset receiver is

switched off and the transmitter

automatically switches off (standby

mode), the

Battery

LED will flash back and forth for 10

minutes to remind you to charge the stethoset receiver.

왘 Charge the stethoset receiver by placing it into the trans-

mitter’s charging compartment (see page 11).

The LED stops flashing and the charging process starts.

Selecting the ear pads

You can choose between ear pads for larger

and smaller ears (supplied). The stethoset

receiver is delivered with the ear pieces for larger ears already

attached.

To replace the ear pads:

1 Carefully remove the ear pads from the stethoset receiver.

2 Put the other ear pads on the stethoset receiver.

You can also switch off the charging reminder function

(see page 26).

Spare ear pads in different materials and forms are

available from your Sennheiser partner.

RS_5000_570727_0117_PRT.book Seite 13 Montag, 10. Oktober 2016 2:52 14