User's Manual

DEFRES EN
Product overview EN
RS 5000 |5
Receiver status LED
Transmitter status LED
Overview of the acoustic signals/beeps
Receiver status LED Stethoset receiver...
– ... is switched off.
lights up green
... is connected to the transmitter.
lights up red
... is connected to the transmitter, the
rechargeable battery is almost empty.
flashes green
... is not connected to the transmitter or
cannot connect to the transmitter.
flashes red
... is not connected to the transmitter or
cannot connect to the transmitter, the
rechargeable battery is almost empty.
Transmitter status LED Transmitter...
– ... is in standby mode.
lights up white
... and stethoset receiver are connected. The
speech intelligibility function is deactivated
(see page 20).
lights up blue
... and stethoset receiver are connected. The
speech intelligibility function is activated
(see page 20).
flashes blue and white
... has detected an incompatible digital audio
signal (see page 7).
Beeps... Meaning
during operation,
2 beeps
The rechargeable battery is almost empty,
recharge it (see page 11).
during operation, no audio
transmission, 5 beeps
The stethoset receiver is outside the trans-
mission range (see page 32).
when changing the
volume
The maximum or minimum volume is
reached (see page 16).
when changing the
balance setting
The maximum or minimum balance setting is
reached (see page 17)
1s1s
1s1s
RS_5000_570727_0117_PRT.book Seite 5 Montag, 10. Oktober 2016 2:52 14