User's Manual

DEFRES EN
Putting the RS 5000 into operation EN
RS 5000 |7
Connection possibility A: optical (digital)
To achieve the best possible listening experience, con-
nect the transmitter to your TV or hi-fi system using the sup-
plied optical digital cable.
Note that your wireless headphone system only supports dig-
ital signals coded in the PCM format. Information on how to
set the audio format of the connected audio source to PCM
can be found in the Sound menu or in the instruction manual
of your device.
If an incompatible digital audio signal is being received, the
Transmitter status LED flashes white and blue. Audio cannot
be reproduced.
* The appearance of the Sound menu can vary depending on the device you
are using.
Connection
possibilities of
the audio source
Color on
trans-
mitter
Connection cable
Page
Optical
(digital)
pink Optical digital cable 7
3.5 mm
jack
socket
(analog)
blue
Stereo audio cable 8
RCA
(analog)
Stereo audio cable with
RCA adapter (3.5 mm jack
socket to 2 RCA connec-
tors; optional accessory)
9
SCART
(analog)
Stereo audio cable with
SCART adapter (3.5 mm
jack socket to SCART con-
nector; optional accessory)
10
Accessories and adapters are available from your local
Sennheiser partner.
A
B
C
D
A
S
oun
d
m
e
nu
*
Digital sound output
Bitst
re
am
P
C
M
Digital Audio
RS_5000_570727_0117_PRT.book Seite 7 Montag, 10. Oktober 2016 2:52 14