User's Manual

Statement required by FCC rules Part 15 and
RSS 210
This device complies with Part 15 of the FCC Rules and with
RSS-210 of Industry Canada. Operation is subjected to the fol-
lowing two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
y Reorient or relocate the receiving antenna.
y Increase the separation between the equipment and
receiver.
y Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
y Consult the dealer or an experienced radio/TV technician for
help.
Warning: Changes or modifications made to this equipment
not expressly approved by Sennheiser electronic GmbH & Co. KG
may void the FCC authorization to operate this equipment.
Sennheiser electronic GmbH & Co. KG
Printed in Germany Publ. 05/06 515879