XS WIRELESS | Publ.
A XS WIRELESS TRUE DIVERSITY RECEIVER set volume sync 1 2 3 4 5 6 7 BALANCED ANT B 8 AUDIO OUT UNBALANCED 9 0 DC 12V 300mA MIC A Typenschild ANT A SQ LINE B C D E F B G O N ANT AB TUNE PRESET SCAN H I 615.375 SYNC B.2 M CH.
C 4 1 2 3 A 615. 375 5 8 7 6 0 9 D 5 615.
Contents EN FR IT ES ZH RU PT NL Important safety instructions ......................................................................................................2 The XS WIRELESS systems ............................................................................................................ 4 Delivery includes ............................................................................................................................. 5 Product overview ..........................................
Important safety instructions Important safety instructions System • Read this instruction manual. • Keep this instruction manual. Always include this instruction manual when passing the products on to third parties. • Heed all warnings and follow all instructions in this instruction manual. • Only clean the products when they are not connected to the mains. Use a cloth for cleaning. • Only use attachments/accessories specified by Sennheiser. • Refer all servicing to qualified service personnel.
Important safety instructions Bodypack transmitter and radio microphone FR ZH RU PT NL ES IT Intended use Intended use of the product of the XS WIRELESS systems includes: • having read this instruction manual especially the chapter “Important safety instructions” on page 2, • using the products within the operating conditions and limitations described in this instruction manual.
The XS WIRELESS systems The XS WIRELESS systems Designed for different areas of application, the XS WIRELESS systems are available in five variants. Presentation Set XSW 12: This system is ideal for presentation applications. The unobtrusive ME 2-2 clip-on microphone is virtually invisible. Instrument Set XSW 72: This system is for connecting musical instruments (e.g. guitar) which have a ¼” (6.3 mm) jack socket directly to the bodypack transmitter.
Delivery includes DE EN FR Instruction manual 2 AA size batteries 2 rod antennas ME 3 headmic MZQ 1 stand mount CI 1 ¼” (6.
Product overview Product overview An overview of the products is given on the inside front cover of this instruction manual. A EM 10 receiver 1 2 3 4 5 6 7 8 9 Standby button Display panel UP button DOWN button button set button volume control Antenna input (ANT B), BNC socket Audio output (BALANCED), XLR-3M socket, balanced 0 Audio output (AUDIO OUT UNBALANCED) ¼” (6.
Putting the XS WIRELESS systems into operation Putting the XS WIRELESS systems into operation You can set up the receiver as a single device or mount it into a 19” rack. For information on rack mounting and optional accessories (e.g. rack mount “ears” and remote antennas), visit the XS WIRELESS product page at www.sennheiser.com.
Putting the XS WIRELESS systems into operation Putting the bodypack transmitter into operation Inserting/replacing the batteries (see fig. “SK 20”) 왘 Use two AA size batteries (1.5 V) for powering the SK 20 bodypack transmitter. 왘 Open the battery compartment cover 0. 왘 Insert the batteries. Observe correct polarity when inserting the batteries.
Using the XS WIRELESS systems Using the XS WIRELESS systems To switch the receiver to standby mode: 왘 Keep the standby button 1 pressed until “OFF” appears on the display panel. EN IT To completely switch the receiver off: 왘 Disconnect the receiver from the mains by unplugging the mains unit from the wall socket. FR To switch the receiver on: 왘 Press the standby button 1. The receiver switches on, the display panel is backlit. 왘 Check the RF signal level “RF” H on the receiver’s display panel.
Using the XS WIRELESS systems Muting the transmitters To mute the transmitters: 왘 Press the MUTE button. The mute LED lights up yellow. The audio signal is muted. To cancel the muting of the transmitters: 왘 Press the MUTE button. The mute LED goes off. The muting is canceled. 615. 375 615. 375 Adjusting the sensitivity 왘 Use the slide switch 6 (SK) or 5 (SKM) to adjust the sensitivity.
Using the XS WIRELESS systems IT Synchronizing a transmitter with the receiver EN SCAN menu item Pressing the set button 6 to activate the SCAN menu item automatically selects an unused channel. To select another frequency bank: 왘 Press the UP button 3 or DOWN button 4. 왘 Press the set button 6 to store your setting. FR PRESET menu item 왘 Use the UP button 3 or DOWN button 4 to select a frequency bank. 왘 Press the set button 6 to store your setting.
Cleaning and maintaining the XS WIRELESS systems Cleaning and maintaining the XS WIRELESS systems CAUTION Liquids can damage the electronics of the products! Liquids entering the housing of the products can cause a short-circuit and damage the electronics. 왘 Keep all liquids away from the products. 왘 Do not use any solvents or cleansing agents. 왘 Before cleaning, disconnect the receiver from the mains. 왘 Only use a soft, slightly damp cloth to clean the products. If a problem occurs ...
Specifications Specifications A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz E: 821-832 MHz and 863-865 MHz EN wideband FM Frequency ranges Switching bandwidth 24 MHz (range E: 13 MHz) Frequencies 960 (range E: 520), tuneable in steps of 25 kHz Signal-to-noise ratio ≥ 103 dBa THD ≤ 1% Temperature range 0°C to +40°C IT 8 frequency banks, each with up to 12 factory-preset channels FR Modulation DE System EM 10 receiver true diversity ES Receiver principle Sensitivity (wi
Specifications Transmitter SK 20 SKM 35 RF output power 10 mW 10 mW AF frequency response 50 – 16,000 Hz 80 – 16,000 Hz (Line) 80 – 16,000 Hz (Mic) AF input 3.5 mm jack socket – – Nom. input voltage (Mic/Line) 0.5 VRMS / 1.8 VRMS at -30 dB gain – – Power supply 2 AA size batteries, 1.5 V 2 AA size batteries, 1.5 V Operating time approx. 10 hrs approx. 10 hrs approx.
Specifications In compliance with (EM, SK and SKM) Europe: EMC Radio Approved by (SK) Canada: Industry Canada RSS 123 (210), IC 2099A-XSWSK FCC-Part 74, FCC-ID: DMO XSWSK FCC-Part 15 C, limited to 698 MHz EN DE Safety EN 301489-1/-3/-9 EN 300422-1/-2, EN 301440, EN 301357 EN 60065, EN 62311 (SAR) Canada: Industry Canada RSS 123 (210), IC 2099A-XSWSKM FCC-Part 74, FCC-ID: DMO XSWSKM FCC-Part 15 C, limited to 698 MHz IT Approved by (EM) ES Industry Canada RSS 123, IC 2099A-XSWEM FCC-Part 15 C, F
Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner.
Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ. 07/11, 542696/A01 XS WIRELESS | Publ. 07/11 Sennheiser electronic GmbH & Co.