MB Pro 1 MB Pro 2 Professional Bluetooth solutions Instruction manual
Contents Contents Important safety information....................................................................................2 Introduction..................................................................................................................3 Package contents..........................................................................................................4 Product overview..........................................................................................................
Important safety information Important safety information XX Please read this instruction manual carefully and com- pletely before using the product. XX Always include this instruction manual when passing the product on to third parties. XX Do not use an obviously defective product. Preventing damage to health and accidents Do not listen at high volume levels for long periods of time to prevent hearing damage. XX Always maintain a distance of at least 3.
Introduction Introduction The comfortable new MB Pro 1 and Pro 2 Bluetooth headsets are the wireless solution for phone calls with mobile phones and softphones with superb sound quality. The ultra noise cancelling microphone integrated into the headset filters away background noise, thus providing ultimate speech intelligibility. Bluetooth The headset complies with the Bluetooth 4.0 standard and is compatible with all Bluetooth 1.1, 1.2, 2.0, 2.1, 3.0 and 4.
Package contents Package contents The products of the MB Pro 1 and MB Pro 2 series are available for different areas of application. The products marked with ML in their name are optimized for Microsoft® Lync™.
Product overview Product overview Overview of headsets MB Pro 1 3 MB Pro 2 4 4 2 3 1 2 1 9 5 6 7 8 1 Windshield 6 Headset LED 2 Microphone 7 Multi-function button 3 Battery compartment 8 Audio button 4 Ear pad 9 Charging contacts 5 Name plate MB Pro1 | MB Pro 2 | 5
Product overview Overview of the headset chargers 1 1 2 CH 20 MB 3 CH 20 MB USB 3 1 Magnetic holder with charging contacts 3 USB plug 2 Headset stand/ USB cable holder Overview of the BTD 800 USB dongle 1 2 3 1 USB plug 3 Link button 2 Link LED Overview of pictograms Meaning of the pictograms for pressing a button Pictogram Meaning Briefly press this button. 2x Double-press this button. 5s Keep this button pressed for 5 seconds.
Product overview Overview of the LED indications Meaning during operation LED Meaning Headset switches on Headset switches off Headset/USB dongle is in pairing mode Pairing was successful Pairing has failed or has been cancelled 2s Connectable state, not connected 2s Once the headset is successfully connected, the LED goes off. Meaning during calls LED on the headset Meaning Incoming call Incoming call + rechargeable battery is weak Meaning during charging LED corresponds to a talk time of ...
Product overview Overview of buttons Multi-function button Press the button 1s Function Page Accepts/ends a call 17 Accepts an incoming call and ends the active call (managing two calls) 19 Cancels redialing 18 Ends the active call and makes the call on hold active (managing two calls) 19 Retrieves information on the remaining talk time 15 Transfers a call from the mobile phone to the headset 18 Activates/cancels voice dialing 17 Rejects a call 18 Rejects the incoming call and continues
Product overview Audio button: Volume adjustment Move the button Function Page During an active call: Increases/reduces the speaker volume 16 During music reproduction: Increases/reduces the audio volume In idle mode (no active call or music reproduction): Increases/reduces the volume for the ring tone, the beeps and the voice prompts Audio button: Mute function | Direction of the audio button’s volume up/ down function | Room experience Press the button 2s 6s Function Page During an active call:
Putting the headset into operation Putting the headset into operation Charging the headset battery 2:30 h 0:40 h 15 h 7.5 h A complete charging cycle takes about 2 hours and 30 minutes. Before using the headset for the first time, charge the rechargeable battery for a complete charging cycle without interruption. 1. Take off the headset and switch it off (see page 14). 2. Place the headset into the magnetic holder of the headset charger. 3.
Putting the headset into operation Battery level indicator displayed on Apple iPhone When the headset is paired with an iPhone, the iPhone screen shows an additional battery level indicator for the headset. Pairing the headset with Bluetooth devices CAUTION Danger of malfunction! The transmitted radio waves of mobile phones can impair the operation of sensitive and unprotected devices. XX Only make calls with the headset in locations where wireless Bluetooth transmission is permitted.
Putting the headset into operation Pairing the headset with a Bluetooth device The following chapter describes, by way of example of a mobile phone, how to pair the headset with a Bluetooth device. In case of deviation, proceed as described in the instruction manual of your mobile phone. 1. Switch the headset off (see page 14). 2. Keep the multi-function button pressed until the LED alternately flashes blue and red. The headset is in pairing mode. 3. Enable the Bluetooth visibility on your mobile phone. 4.
Using the headset Using the headset Individually adjusting the headset and wearing it 1. Rotate the microphone boom. 2. Bend the microphone boom so that the microphone is about 0.8” (2 cm) from the corner of your mouth. 3. Adjust the headset so that the –– MB Pro1: ear pad rests comfortably on your right or left ear. –– MB Pro2: the ear pads rest comfortably on your ears.
Using the headset Switching the headset on and connecting it XX Press the multi-function button for 2 seconds or take the headset from the magnetic holder or the charging cable. The voice prompt “Power on” is announced in the headset. The LED flashes 3 times blue every 2 seconds until the headset finds a paired Bluetooth device to connect to.
Using the headset Activating/deactivating the voice prompts 1. Switch the headset on (see page 14). 2. Simultaneously press and hold the headset‘s multi-function button and Audio button for 5 seconds. The voice prompts are now activated/deactivated and the voice prompt “Voice on” or “Voice off” is announced in the headset. ON 5s ”Voice on” / ”Voice off” If the voice prompts are deactivated, the headset emits beeps.
Using the headset Changing the volume Vol + CAUTION Hearing damage due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. XX XX Vol – Set the volume to a low level before putting on the headset. Do not continuously expose yourself to high volumes.
Using the headset Making calls using the headset Making a call XX Dial the desired number on your mobile phone or softphone. You hear a beep in the headset. If your mobile phone does not automatically transfer the call to the headset: XX Press the multi-function button on the headset or press a corresponding button on your mobile phone (see the instruction manual of your mobile phone).
Using the headset Transfering the call to/from the headset Once a connection is established, you can transfer the call to/from the headset. XX Press the multi-function button: Duration Function Beeps Transfers a call from the headset to the mobile phone 1s Transfers a call from the mobile phone to the headset Redialing The redialing function is only supported by Bluetooth devices with a “hands free profile” (HFP).
Using the headset Muting the headset’s microphone XX Press the Audio button. The headset‘s microphone is muted. During the muting, the Link LED flashes red. Duration Function Voice prompt Mutes the headset’s microphone ”Mute on“ Unmutes the headset’s microphone ”Mute off“ Managing multiple calls You can use the headset simultaneously with two connected Bluetooth devices (see page 11). XX Switch the headset on.
Using the headset Restoring factory default settings (Reset) 1. Switch the headset off (see page 14). 2. Keep the multi-function button pressed until the LED alternately flashes blue and red. 3. Simultaneously press and hold the headset‘s multi-function button and Audio button for 5 seconds. The LED flashes 3 times purple and then alternately blue and red. The headset tries to pair with Bluetooth devices (see page 11).
Cleaning and maintaining the headset Cleaning and maintaining the headset CAUTION Liquids can damage the electronics of the product! Liquids entering the housing of the device can cause a short circuit and damage the electronics. Keep all liquids far away from the product. XX Do not use any cleansing agents or solvents. XX Cleaning the headset and the headset charger Before cleaning, unplug the USB plug of the charging cable. XX Only use a dry and soft cloth to clean the product.
Cleaning and maintaining the headset Replacing the headset’s rechargeable battery CAUTION Damage to the product due to improper handling! The cables can be kinked or damaged if you open the battery compartment too jerkily. XX Carefully open the battery compartment and loosen the connector plug of the rechargeable battery. Spare rechargeable batteries are available from your Sennheiser partner. Only use spare rechargeable batteries recommended by Sennheiser.
Cleaning and maintaining the headset Replacing the rechargeable battery of the MB Pro 2 headset 1. Carefully remove the ear pad from the ear cup where the battery compartment is located. 2. Open the battery compartment. 1 2 3. Remove the rechargeable battery and carefully loosen the connector plug of the rechargeable battery. 4. Insert the connector plug of the new rechargeable battery into the connection socket. Observe correct orientation of the connector plug. 5.
Cleaning and maintaining the headset Updating the software of the product You can update the software of your headset and Bluetooth dongle by using the free “Sennheiser Updater” PC software. Download the “Sennheiser Updater” from www.sennheiser.com/cco/software. XX Install the PC software. To install the software, you need administrator rights on your computer. If necessary, contact your IT department. XX To update the software, connect only one product at a time.
Cleaning and maintaining the headset Updating the software of the Bluetooth USB dongle 1. Plug the Bluetooth USB dongle into the USB port of your PC. 2. Start the “Sennheiser Updater”. The “Sennheiser Updater” compares the installed firmware version of the Bluetooth USB dongle to the latest firmware version available for download. Upgrade to the latest version according to the instructions of the “Sennheiser Updater”.
If a problem occurs ... If a problem occurs ... Problem Possible cause Solution Page Headset cannot be switched on The rechargeable battery is flat Recharge the rechargeable battery. 10 Check if the headset is paired. If necessary, pair the headset again. 11 No audio signal The headset is not paired with the mobile phone The volume is adjusted Increase the volume. too low 16 The headset is switched off Switch the headset on.
Specifications Specifications MB Pro 1 | MB Pro 2 Dimensions (W x H x D) Weight Standby time Talk time Charging time of rechargeable battery Rechargeable battery (built-in) Speaker type Speaker frequency response Sound pressure level Microphone type Microphone frequency response 170 x 175 x 55 mm MB Pro 1: approx. 64 g MB Pro 2: approx. 83 g up to 19 days up to 15 hours 2 hours 30 minutes Lithium Polymer; 3.
Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser. com or contact your Sennheiser partner. Sennheiser product warranty FOR AUSTRALIA ONLY In Sennheiser’s goods come with guarantees that cannot be excluded under the Australian Consumer Law.
Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark www.sennheiser.com Publ.
