Set 55 TV Set 50 TV Instructions for use
A
B
C A B C
Contents Safety instructions .......................................................................... 2 The Set 50 TV/Set 55 TV stethoset receiver system ...................... 3 Set 50 TV: Delivery includes ............................................................ 3 Set 55 TV product variant .................................................................... 4 Operating controls ........................................................................... 4 Receiver (see inside cover) .................
Safety instructions y Please read these instructions carefully and completely before using the system. y Make these instructions easily accessible to all users at all times. Always include these instructions when passing the system on to third parties. y Do not wear the headphones in situations which require special attention (e.g. when performing skilled jobs). y Always keep the system dry and do not expose it to extreme temperatures (ideally 10-35°C).
The Set 50 TV/Set 55 TV stethoset receiver system The Set 50 TV/Set 55 TV is a cordless infra-red stethoset receiver system with which you can adjust the volume of your TV, radio, personal stereo and other hi-fi equipment to suit your individual needs. In addition, the system allows you to move around freely without the constrictions of cables within the room where the transmitter is placed.. The Set 50 TV/Set 55 TV is particularly easy and intuitive to operate.
Set 55 TV product variant The scope of delivery of the Set 55 TV variant is identical to the delivery of the Set 50 TV but includes: y 1 RI 55 stethoset receiver y 1 TI 55 transmitter with integrated charging compartment y 2 BA 151 NiMH rechargeable batteries Operating controls A Receiver (see inside cover) On/Off/volume control Compartment for BA 151 rechargeable battery Balance control B Transmitter (see inside cover) 3.
Putting the system into operation Setting up the transmitter 왘 Place the transmitter so that there are no obstacles in the light path between transmitter and receiver. Note: Avoid exposure to direct sunlight. Direct sunlight may interfere with the reception and may damage the transmitter.
Connecting the transmitter to the sound source 왘 Plug in one end of the connecting cable AUDIO INPUT socket on the transmitter. to the blue 왘 Check the connection possibilities of your sound source (e.g. TV). A B C TV TV AV L Headphone socket D No socket R RCA sockets SCART socket External microphone A Connecting the transmitter via the headphone socket t oucket so dio e audphon hea 왘 Plug in the other end of the connecting cable headphone socket on your sound source.
B 왘 Connect the connecting cable t ou o et di sock au CA R Connecting the transmitter via the RCA sockets to the adapter (RCA socket) . 왘 Connect the red and white RCA connectors of the adapter to the matching red and white RCA sockets on your sound source. R L Note: With most TVs, the RCA sockets are located at the rear.
Connecting the transmitter to the mains 왘 Connect the mains unit to the yellow socket (12 VDC) on the transmitter. 왘 Plug the mains connector into a wall socket. The LED lights up green. If the receiver is stored in the transmitter’s charging compartment , the LED goes off. Note: Pull the mains connector out of the wall socket when the transmitter will not be used for extended periods of time (e.g. when you are on holiday). In this case, however, the rechargeable battery will not be recharged.
Using the system components Switching the transmitter on 왘 Take the stethoset receiver out of the transmitter’s charging compartment . The transmitter automatically switches on. The LED lights up green. Note: If the receiver is placed into the transmitter’s charging compartment , the transmitter automatically switches off. The LED goes off. Switching the stehoset receiver on Attention! Volume up? - No! When people use headphones, they tend to choose a higher volume than with loudspeakers.
Adjusting the balance 쐋 The Set 50 TV/Set 55 TV features a balance control for right/left volume adjustment. 왘 Use the balance control to adjust the volume so that you hear equally well with both ears. Storing and charging the receiver Do not store your receiver on a glass dummy head, chair armrest, or similar for long periods of time as this can reduce the contact pressure of the earbows. 왘 To switch the receiver off, turn the volume control backwards until it clicks.
Meaning of the LEDs LEDs on the transmitter LED Status Operation indication lit green The transmitter is switched on. The receiver is not stored in the transmitter’s charging compartment . off Charging control LED of lit red spare rechargeable battery Charging control LED of receiver rechargeable battery Meaning The transmitter is switched off. The receiver is stored in the transmitter’s charging compartment .
Care and maintenance Cleaning the system Attention! Liquids can damage the electronics of the units! Liquids entering the housing of the units can cause a short-circuit and damage the electronics. 왘 Keep all liquids far away from the units. 왘 Before cleaning, disconnect the transmitter from the mains. 왘 Only use a slightly damp cloth to clean the units. Do not use any cleansing agents or solvents. Cleaning the ear cushions 왘 Carefully remove the ear cushions from the receiver.
If problems occur...
Accessories Attention! Components from other manufacturers (e.g. for power supply or rechargeable battery) may cause damage to the unit and will invalidate the warranty. 왘 Only use original Sennheiser accessories and spare parts. The following accessories are available from your authorized Sennheiser dealer: BA 151 spare rechargeable battery Cat. No. 004146 Ear cushions (normal), 5 pairs Cat. No. 517625 Ear cushions (lamellar form), 5 pairs Cat. No. 517626 SCART adapter Cat. No.
Specifications System Modulation FM mono Carrier frequencies 2.3 MHz Range approx 12 m within a room AF frequency response 50 Hz–12 kHz THD <1% Transmitter Audio /microphone connection 3.5 mm stereo jack socket Charging time of rechargeable battery approx. 14 hours Power supply 12 VDC/200 mA via NT 5 mains unit Weight approx. 90 g Dimensions approx. 95 x 130 x 30 mm Receiver Max. SPL 120 dB (SPL) Power supply via BA 151 NiMH rechargeable battery (2.
Manufacturer Declarations Warranty regulations The guarantee period for this Sennheiser product is 24 months from the date of purchase. Excluded are accessory items, rechargeable batteries that are delivered with the product; due to their characteristics these products have a shorter service life that is principally dependent on the individual frequency of use. The guarantee period starts from the date of original purchase.
Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in China Publ.
