User Manual

4|MKE 600
Using the “Low Cut” filter
왘 Set the “Low Cut” switch 2 to the desired position.
Cleaning and maintaining the MKE 600
왘 Only use a soft, dry cloth to clean the product.
Switch position Frequency response of the microphone
linear frequency response
frequencies below 100 Hz are attenuated to
reduce wind and impact noise
CAUTION
Damage to the product due to liquids!
Liquids entering the product can short-circuit the electronics or dam-
age the mechanics. Solvents or cleansing agents can damage the sur-
face of the product.
왘 Keep all liquids away from the product.
2
MKE 600_SP9.book Seite 4 Donnerstag, 10. Mai 2012 12:47 12